Juniper,JN0-347試験概要,JN0-347受験記対策,JN0-347難易度

KtestのJNCIS-ENT資格のJN0-347試験問題集はIT職員としてのあなたがIT試験に受かる不可欠なトレーニング資料です。KtestのJNCIS-ENT資格のEnterprise Routing and Switching, Specialist (JNCIS-ENT)試験問題集はカバー率が高くて、更新のスピードも速くて、完全なトレーニング資料ですから、Ktestを手に入れたら、全てのIT認証が恐くなくなります。Ktest を選択して98%の合格率を確保することができて、もし試験に失敗したら、Ktestが全額で返金いたします。今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。

ITは、世界で最も競争力のある分野、今日の一つです。だから、多くの人が生き残ったとITは子供の遊びではありませんで繁栄非常に多くの良い大学からの非の打ちどころのない程度に、平均して、情報技術関連の仕事とフィールドになってきました。とにかくこれからは違います!

JuniperJN0-347試験参考書は、様々なIT分野でのスキルアップを支援するため多数の分野における、JNCIS-ENT認定資格、JN0-347試験参考書を提供しています。JNCIS-ENT資格認定を取得するために必要なものは問題集と思います。Enterprise Routing and Switching, Specialist (JNCIS-ENT)試験では、受験スキルではなく、実務作業のスキルが試されます。問題と答え(QとA)は一番いい方法を使用して、実際の試験を用意するに参考価値があります。KtestのJN0-347試験参考書は試す認定試験に自信を持って勉強者の能力を高めます。KtestのJN0-347試験参考書を使って、簡単に一発合格できます。JNCIS-ENT資格認定を取得することで、ITエンジニアに必要なスキルを明確に証明されるので試験だけでも需要は多いです。業務など通じて知識やスキルを体系的に習得していけば、エンジニアとしての有効な武器となることは間違いありません。JuniperJNCIS-ENT認定資格のEnterprise Routing and Switching, Specialist (JNCIS-ENT)試験問題集を使って、勉強者の自信がもっと高くて、一発合格するこ とを保証いたします。JuniperJNCIS-ENT認定資格は国際的に通用する高度な技術力の証として、専門知識と経験の深さを世界共通の基準で測り認定する資格制度です。JuniperJNCIS-ENT資格の取得によって自身のネットワークに関する知識を証明し、雇用機会を高めるだけではなく、給与や業務の向上、社内昇進へとつながることが多くなります。Ktestの試験参考書はIT業界最先端のJN0-347模擬試験ソフトは実際の試験雰囲気を模擬したものです。

KtestJNCIS-ENT資格のJN0-347試験参考書を購入したら、あなたは一年間の無料アップデートサービスを取得しました。試験問題集が更新されると、Ktestは直ちにあなたのメールボックスにJN0-347試験参考書の最新版を送ります。あなたは試験の最新バージョンを提供することを要求することもできます。最新のJN0-347試験参考書を知りたい場合、試験に合格したとしてもKtestは無料で問題集を更新してあげます。JuniperのJN0-347試験参考書に合格するのは難しいですが、合格できるのはあなたの能力を証明できるだけでなく、国際的な認可を得られます。JuniperのEnterprise Routing and Switching, Specialist (JNCIS-ENT)試験参考書の準備は重要です。我々Ktestの研究したJuniperのEnterprise Routing and Switching, Specialist (JNCIS-ENT)復習資料は科学的な方法であなたの圧力を減少します。

400-201vce,400-201参考書,400-201模擬試験,400-201合格率

あなたにとても良い指導を確保できて、試験に合格するのを助けって、Ktestからすぐにあなたの通行証をとります。Ktestが提供したCiscoのCCIE Service Provider試験参考書を利用したら、Ciscoの400-201試験参考書に受かることはたやすくなります。Ktestがデザインしたトレーニングツールはあなたが一回で試験に合格することにヘルプを差し上げられます。KtestのCisco400-201試験参考書トレーニング資料即ち問題と解答をダウンロードする限り、気楽に試験に受かることができるようになります。まだ困っていたら、我々の試用版を使ってみてください。

Ktestのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された98%の成功率を持っている資料です。Ktestを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。何でも上昇しているこの時代に、自分の制限を突破したくないのですか。給料を倍増させることも不可能ではないです。Ciscoの400-201試験参考書試験に合格したら、あなたは夢を実現することができます。Ktestはあなたの最高のトレーニング資料を提供して、98%の合格率を保証します。これは本当のことです。疑いなくすぐKtestのCiscoのCCIE Service Provider試験参考書を購入しましょう。
Share some CCIE 400-201 exam questions and answers below.
ISP_X has IPv4 only enabled in the MPLS backbone. ISP_X must provide IPv6 services to its customers including IPv6 Internet access.

Which IPv6 transition mechanism allows ISP_X to provide IPv6 connected by leveraging the existing MPLS IPv4 core network?

A. 6to4 tunnels

B. NAT444

C. 6PE

D. NAT64

E. 6RD

F. DS Lite

Answer: A

Which multicast feature listens multicast conversations maintaining a map in order to control which ports receive specific multicast traffic?

A. Bidirectional PIM

B. Source Specific Multicast

C. PIM assertion

D. IGMP snooping

Answer: D

An engineer wants to configure MPLS TE Fast Reroute with link protection on five routers. Which methodology can reduce configuration on the point of the local repair router and successfully complete the task?

A.Configure a backup tunnel on the PLR.

B.Enable the autotunnel backup feature.

C.Configure a backup tunnel on the tunnel headend router.

D.Enable the autotunnel primary feature.

Answer: B

Refer to the exhibit, Which feature does this OSPF database entry refer to?

A. Intra-autonomous traffic engineer

B. Inter-autonomous traffic engineer

C. Segment routing

D. mVPN

E. LFA repair path attributes

Answer: A

A service provider is using point-to-multipoint TE to forward MPLS traffic from one source to multiple destinations, what is a restriction of using this method?

A. Destinations must be manually added and removed on the TE tail-end router

B. Multicast traffic must be implemented using PIM sparse mode

C. Point-to-multipoint TE does not support policy-based routing

D. Only node protection is supported on point-to-multipoint TE LSPs

Answer: C

Refer to the exhibit.

CE6 cannot ping the loopback address of C7.An SP engineer notices a routing loop between PE2 and CE4.

Which configuration must be applied on both PE routers to avoid the routing loop?

A. Neighbor<CE-IP address>soo<value> with the same SoO value on both PEs

B. Neighbor<CE-IP address>soo<value> with a different SoO value in each PE

C. No neighbor<CE-IP address> as-override

D. Neighbor<CE-IP address> allows-in

Answer: A

An operation engineer from AS 2000 must deploy this inbound routing policy :

• Based on RFC 1998, modify the local-preference value for prefixes containing BGP community values 2000:90 and 2000:110

• Strip any BGP community of the BGP prefixes received from customers that are in the range between 2000:1 and 2000:2000. Any other BGP community values must not be removed

• Apply 2000:1003 BGP community Value, which indicates that the BGP prefix is learned form a customer

Which configuration accomplishes this BGP routing policy?

A.

B.

C.

D.

E.

Answer: E

Which two statements about 10 Gigabit Ethernet WAN PHY mode are true? (Choose two.)

A.The signal maps to an OC-192c/STM-64c payload.

B.The nominal speed is 9.95328 Gbps.

C.It is compatible with Packet Ethernet over SONET.

D.The signal maps to an OC-768c/STM-256c payload.

E.It is compatible with Packet over SONET.

F.The nominal speed is 10.3125 Gbps.

Answer: AB

これは賞賛の声を禁じえない参考書です。この問題集より優秀な試験参考書を見つけることができません。この400-201過去問では、あなたが試験の出題範囲をより正確に理解することができ、よりよく試験に関連する知識を習得することができます。そして、もし試験の準備をするが足りないとしたら、400-201過去問問題集に出る問題と回答を全部覚えたらいいです。この問題集には実際の400-201過去問試験問題のすべてが含まれていますから、それだけでも試験に受かることができます。なぜ受験生のほとんどはKtestを選んだのですか。それはKtestがすごく便利で、広い通用性があるからです。

Oracle Software as a Service – Oracle Customer Experience Cloud 1Z0-971最新の試験問題集

Ktestが開発した問題集は本試験と同じで、KtestのOracle Software as a Service – Oracle Customer Experience Cloud資格1Z0-971試験参考書を使って、受験の自信を向上させることができます。無事に1Z0-971試験参考書試験に合格することが保証できます。受験の前に 無料サンプルを体験して頂くことができます。KtestOracleSoftware as a Service – Oracle Customer Experience Cloud資格認定Oracle Incentive Compensation Cloud 2017 Implementation Essentials試験参考書は高い品質のトレーニングを提供できる。当社の認定試験問題集によって、勉強者の認定合格になると保証します。Ktestの先進的な認定トレーニングによって、簡単に試験合格になって、認定された専門家になれます。

Ktestが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。「今の生活と仕事は我慢できない。他の仕事をやってみたい。」このような考えがありますか。しかし、どのようにより良い仕事を行うことができますか。ITが好きですか。ITを通して自分の実力を証明したいのですか。IT業界に従事したいなら、IT認定試験を受験して認証資格を取得することは必要になります。あなたが今しなければならないのは、広く認識された価値があるIT認定試験を受けることです。そうすれば、新たなキャリアへの扉を開くことができます。

Share some Software as a Service – Oracle Customer Experience Cloud 1Z0-971 exam questions and answers below.
A payment plan is to be configured to pay a minimum (draw) flat amount of 8,000 per period, which is nonrecoverable. Payment adjustments must be applied only to commission type earnings, and bonus earnings should not be adjusted by the payment plan.

How should you configure the payment plan?

A. Associate the “Commission” payment group category to ‘Commission’ type plan components. In the Payment Plan, select ‘Commission’ from the Payment Group Category drop down, enter 8,000 in the Flat Minimum Amount to Pay Participant field, enter 8,000 in the Maximum Payment field, select “Yes” for the Carry Forward Maximum drop down, and select ‘No’ for the Minimum Recovery option.

B. Associate the ‘Commission’ Incentive Type (payment group category) to ‘Commission’ type plan components. In the Payment plan, select ‘Commission’ from the Payment Group Category drop down, enter 8,000 in the Flat Minimum Amount to Pay Participant field, and select ‘No’ for the Minimum Recovery option.

C. Associate the ‘Commission’ Incentive Type (payment group category) to ‘Commission’ type plan components. In the Payment Plan, select ‘Commission’ from the Payment Group Category drop down, enter 8,000 in the Flat Minimum Amount to Pay Participant field, and select the ‘Yes’ for the Minimum Recovery option and ‘Immediate’ for the Recovery Start option.

D. Associate the ‘Commission’ payment group category to “Commission’ type plan components. In the Payment Plan, select ‘Commission’ from the Payment Group Category drop down, enter 8,000 In the Flat Minimum Amount to Pay Participant field, enter 8,000 in the Maximum Payment field, select ‘Yes’ for the Carry forward Maximum drop down, select ‘Yes’ for the Minimum Recovery option, and ‘Immediate’ for the Recovery Start option.

Answer: B

A performance measure is to be set up to determine the commission rate using total sales attainment percentage for a quarter, which is measured as total sales by participant for the quarter divided by target for the quarter.

How would you set up this performance measure?

A. Set Process Transaction = Grouped By Interval and Interval = Quarter, have the input expression ‘sum(Credit.transaction amount/Measure.Target)’, and enter targets in the plan component associated with the performance measure.

B. Set Process Transaction = Individually and Interval = Quarter, select Running Total, select Accumulate for input expression ‘credit.transaction amount’, and enter targets in the plan component associated with the performance measure.

C. Set Process Transaction = Individually and Interval = Quarter, select Running Total, select Accumulate for input expressions ‘transaction amount’, and enter targets directly in the performance measure

D. Set Process Transaction – Grouped By Interval and Interval = Quartet, have the input expression ‘sum(Credit.transaction amount/Measure.Target)’, and enter targets directly in the performance measure.

Answer: A

Which two statements are true about disputes?

A. Disputes are assigned to the analyst who is associated with the participant creating the dispute.

B. Disputes are assigned to the analyst who is associated with the participant creating the dispute, and assigned to the compensation manager who the analyst reports to in the payment analyst hierarchy.

C. Participants can view the disputes they have created in their worklist

D. Compensation Managers can reassign disputes to different analysts.

Answer: A

In a rollup hierarchy, three salespeople report to a manager and the manager reports to a director. The manager is also entitled to receive direct credit from one of the direct credit rules.

How should the rollup (Indirect) credit be allocated to the manager and the director in this scenario?

A. The manager receives only direct credit (no rollup credit) and the director receives rollup credit only for the manager’s direct credit.

B. The manager receives only direct credit (no rollup credit) and the director receives rollup credit for all salespeople under the manager, as well as for the manager’s direct credits.

C. The manager receives rollup credit for all direct reports and the director receives rollup credit for all salespeople under the manager, as well as for the manager’s direct credits.

D. The manager receives rollup credit for direct reports and the director receives rollup credit only for the manager’s direct credits.

E. There will be no rollup credits for the manager and the director because a manager cannot be configured to receive both rollup and direct credits.

Answer: C

Of what type of role is Incentive Compensation Analyst an example?

A. Job

B. Abstract

C. Duty

D. Work Area

Answer: A

You have to write a custom function that accesses the performance measure output.

You must pass the following parameters to uniquely identify data and do custom calculations.

plan_cooponent_id

formaula_id

Participant_id

Period id

In which table should you configure the required columns?

A. CN TP KEASURE_RESULTS_ALL

B. CN SRP_PER_FORM_METRICS_ALL

C. CW_TP_EARNINGS_ALL

D. CM SRP PARTICIPANTS ALL

Answer: B

The status of the ESS (Enterprise Scheduler Service) request is ‘Succeeded.’ But the transaction is not credited, and the status of the transaction is not ‘Credited.’

Which statement is the most complete and gives a correct list of settings and actions that are needed for a transaction to generate valid credits?

A. Answer B plus-You must run Deploy Credit Rules for the correct date range.

B. Answer B plus-You must assign the correct credit category to the performance measure.

C. Answer B plus-You must set ‘Enable Rollup’ to ‘Yes1 and select ‘Rollup in Credit Hierarchy.

D. Answer A plus—If the ‘Enable Classification’ parameter is set to ‘Yes’ and ‘Classify Transactions’ Is set to ‘After collection and before crediting/ then ensure classifying the transactions before running crediting.

E. The ‘Enable Direct Crediting’ parameter is set to “Yes* and the credit rules have valid attributes. Attribute values and a credit receiver are assigned.

Answer: E

Your stand alone SaaS implementation project starts in two weeks. With which four roles must you staff your consulting team?

A. Business Analyst, DBA, Reporting Specialist, Data Specialist

B. System Administrator Business Analyst, Reporting Specialist, Project Manager

C. System Administrator, Business Analyst, DBA, Project Manager

D. Business Analyst, Reporting Specialist, Data Specialist, Project Manager

Answer: D

Software as a Service – Oracle Customer Experience Cloud資格の1Z0-971試験問題集はIT業界の中でとても重要な認証試験で、合格するために良い訓練方法で準備をしなければなりません。インターネットで高品質かつ最新のSoftware as a Service – Oracle Customer Experience Cloud資格の1Z0-971試験問題集を提供していると言うサイトがたくさんあります。サイトに相関する依頼できる保証が何一つありません。ここで私が言いたいのはKtestのコアバリューです。OracleのSoftware as a Service – Oracle Customer Experience Cloud資格の1Z0-971試験問題集は非常に重要ですが、こんな情報技術が急速に発展している時代に、Ktestはただその中の一つです。では、なぜ受験生たちはほとどKtestを選んだのですか。

ktestのCisco CCNP 300-115 問題集は試験と同じレベルの問題が出題されてます

クラウドエンジニアに求められるのは、古い概念にとらわれない柔軟な思考と、スピードに対応できる姿勢、そして、未知のことを恐れないチャレンジ精神です。どちらかというと、英検のように安定した資格を求める思考ではなく、何に役に立つかわからないけど、とりあえずおもしろそうだから世界遺産検定を受けてみようという思考が求められる、そんな時代なのだと思います。IT業界で仕事している皆さんはCiscoの認定試験を受験して資格を取得することを通して、彼らの知識やスキルを向上させます。300-115資格問題集はCCNP資格の最も重要な試験の一つです。このCCNP資格は皆さんに大きな利益をもたらすことができます。
Share some CCNP 300-115 exam questions and answers below.
After configuring new data VLANs 1020 through 1030 on the VTP server, a network engineer notices that none of the VTP clients are receiving the updates.

What is the problem?

A. The VTP server must be reloaded.

B. The VTP version number must be set to version 3.

C. After each update to the VTP server, it takes up to 4 hours propagate.

D. VTP must be stopped and restarted on the server.

E. Another switch in the domain has a higher revision number than the server.

Answer: B

An access switch has been configured with an EtherChannel port. After configuring SPAN to monitor this port, the network administrator notices that not all traffic is being replicated to the management server.

What is a cause for this issue?

A. VLAN filters are required to ensure traffic mirrors effectively.

B. SPAN encapsulation replication must be enabled to capture EtherChannel destination traffic.

C. The port channel can be used as a SPAN source, but not a destination.

D. RSPAN must be used to capture EtherChannel bidirectional traffic.

Answer: C

Which SDM template disables routing and supports the maximum number of unicast MAC addresses?

A. VLAN

B. access

C. default

D. routing

Answer: A

After the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible.

Which vendor-neutral protocol could be used to resolve this issue?

A. Local Area Mobility

B. Link Layer Discovery Protocol

C. NetFlow

D. Directed Response Protocol

Answer: B

In a Cisco switch, what is the default period of time after which a MAC address ages out and is discarded?

A. 100 seconds

B. 180 seconds

C. 300 seconds

D. 600 seconds

Answer: C

Which option lists the information that is contained in a Cisco Discovery Protocol advertisement?

A. native VLAN IDs, port-duplex, hardware platform

B. native VLAN IDs, port-duplex, memory errors

C. native VLAN IDs, memory errors, hardware platform

D. port-duplex, hardware platform, memory errors

Answer: A

A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN template. The SDM template is causing the CPU of the switch to spike during peak working hours.

What is the root cause of this issue?

A. The VLAN receives additional frames from neighboring switches.

B. The SDM VLAN template causes the MAC address-table to overflow.

C. The VLAN template disables routing in hardware.

D. The switch needs to be rebooted before the SDM template takes effect.

Answer: C

The network manager has requested that several new VLANs (VLAN 10, 20, and 30) are allowed to traverse the switch trunk interface. After the command switchport trunk allowed vlan 10, 20, 30 is issued, all other existing VLANs no longer pass traffic over the trunk.

What is the root cause of the problem?

A. The command effectively removed all other working VLANs and replaced them with the new VLANs.

B. VTP pruning removed all unused VLANs.

C. ISL was unable to encapsulate more than the already permitted VLANs across the trunk.

D. Allowing additional VLANs across the trunk introduced a loop in the network.

Answer: A

現在の社会の中で優秀なIT人材が揃て、競争も自ずからとても大きくなって、だから多くの方はITに関する試験に参加してIT業界での地位のために奮闘しています。300-115試験過去問はCiscoの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。我々はCiscoの300-115試験過去問準備と解答また試験シミュレータを最初に提供し始めたとき、私達が評判を取ることを夢にも思わなかった。我々が今行っている保証は私たちが信じられないほどのフォームです。Cisco300-115試験過去問はKtestの保証を検証することができ、98%の合格率に達することができます。

KtestのCCNP認定資格の300-115は高度に認証されたIT領域の専門家の経験と創造を含めているものです。そのけん異性は言うまでもありません。もし君はいささかな心配することがあるなら、あなたはうちの商品を購入する前に、Ktestは無料でサンプルを提供することができます。CCNP認定資格の300-115認定試験に受かるためにがんばって勉強していれば、はあなたにヘルプを与えます。Ktestが提供したCCNP認定資格の300-115問題集は実践の検査に合格したもので、最も良い品質であなたがCCNP認定資格の300-115認定試験に合格することを保証します。

短期集中で勉強すれば、Cisco CCNP 300-135受験対策で8-10時間で十分だと思います

全てのIT職員はCiscoの300-135試験問題集をよく知っています。これは一般的に認められている最高級の認証で、勉強者のキャリアにヘルプを与えられます。勉強者はその認証を持っているのですか。Ciscoの300-135試験問題集は非常に難しい試験ですが、KtestのCiscoの300-135試験問題集を手に入れたら大丈夫です。Troubleshooting and Maintaining Cisco IP Networks試験が難しいと感じるのは良い方法を選択しないからです。Ktestを選んだら、成功の手を握ることがきるようになります。買う前に、300-135無料サンプルでダウンロードできます。Ktestは資格試験の準備に全面的な問題集を提供して、勉強者を成功に就職できるように 手伝います。

Share some CCNP 300-135 exam questions and answers below.
Ticket 4 NATACL

TROUBLE TICKET STATEMENT:

The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).

show run by yourself to obtain the following information:

Configuration on R1

ip nat inside source list nat_pool interface Serial0/0/0/1 overload !

ip access-list standard nat_pool

permit 10.1.0.0

! interface Serial0/0/0/1

ip address 209.65.200.224 255.255.255.252

ip nat outside

! interfaceSerial0/0/0/0.12

ip address 10.1.1.1 255.255.255.252

ip nat inside

ip ospf message-digest-key 1 md5 TSHOOT

ip ospd authentication message-digest

On Which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

Answer: A

Ticket 5 R1ACL

TROUBLE TICKET STATEMENT:

The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).

show run by yourself to obtain the following information:

Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.

Configuration on R1

! interface Serial0/0/0/1

description link to ISP

ip address 209.65.200.224 255.255.255.252

ip access-group edge_security in

ip nat outside

ip virtual-reassembly

ntp brasdcast client

net broadcast key 1

no cdp enable

!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255

ip access-list nat_traffic permit 10.2.0.0 0.0.255.255

! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any

ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any

ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any

ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any

ip access-list edge_security permit ip host 209.65.200.241 any

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

Answer: A

The Fault Condition is related to which technology?

A. BGP

B. NTP

C. IP NAT

D. IPv4 OSPF Routing

E. IPv4 OSPF Redistribution

F. IPv6 OSPF Routing

G. IPv4 layer 3 security

Answer: A

The fault condition is related to which technology?

A. NTP

B. IPv4 OSPF Routing

C. IPv6 OSPF Routing

D. IPV4 and IPV6 Interoperability

E. IPv4 layer 3 security

Answer: D

What is the solution to the fault condition?

A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.

B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.

C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.

D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.

Answer: D

How to check MTU of interface using ping? / How can you check the links mtu size with ping command?

A. ping 10.1.1.1 size 1501

B. ping 10.1.1.1 size 1500 df-bit

C. ping 10.1.1.1

D. ping 10.1.1.1 no-size

Answer: B

The Fault Condition is related to which technology?

A. BGP

B. NTP

C. IP NAT

D. IPv4 OSPF Routing

E. IPv4 OSPF Redistribution

F. IPv6 OSPF Routing

G. IPv4 layer 3 security

Answer: A

R1 and R2 OSPF neighbor.

Which two statements are true? (Choose two)

(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)

A. They are not neighbors

B. R1 (non-DR) will not update its routes to R2

C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)

D. They need to be configured as OSPF NBMA

E. R2 should be configured as stub

Answer: BC

受験者の最高のKtest試験トレーニング教材、および発見、CiscoCCNP認定資格質問と回答、気軽に試験に合格することができるんです。ご安心くださいね。

Ciscoはあなたに知識を与える認定します。あなたが開発し、スキルを学んだだろう。それはあなたのキャリアの次のレベルに行くことができます。あなたはあなたの専門知識の次のレベルにステップような方法で、より多くの機会は、あなたのキャリアの中で来ます。 CiscoがCCNP認定プロフェッショナルは、雇用者によって好まれます。CCNP認定資格はまた、より多くの企業がそれに多くの注意を払っているので、あなたの社会的地位を高めるためのショートカットです。あなたはキャリアパスに明るい未来を取得します。