Ciscoの300-135試験参考書認定試験は業界で広く認証されたIT認定です。世界各地の人々はCiscoの300-135試験参考書認定試験が好きです。この認証は自分のキャリアを強化することができ、自分が成功に近づかせますから。Ciscoの300-135試験参考書試験と言ったら、Ktest のCiscoの300-135試験参考書試験トレーニング資料はずっとほかのサイトを先んじているのは、Ktest にはIT領域のエリートが組み立てられた強い団体がありますから。その団体はいつでも最新のCiscoTroubleshooting and Maintaining Cisco IP Networks試験参考書を追跡していて、彼らのプロな心を持って、ずっと試験トレーニング資料の研究に力を尽くしています。難しいIT認証試験に受かることを選んだら、頑張って準備すべきです。
Share some CCNP 300-135 exam questions and answers below. What is the MTU¡¯s size in a GRE tunnel?
A. 1630
B. 1476
C. 1500
D. 1900
Answer: B
What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration delete the tunnel mode ipv6 command.
B. Under the interface Serial0/0/0.34 configuration enter the ipv6 address 2026::34:1/122 command.
C. Under the interface Tunnel34 configuration enter the ip address unnumbered Serial0/0/0.34 command.
D. Under the interface Tunnel34 configuration delete the tunnel source Serial0/0/0.34 command and enter the tunnel source 2026::34:1/122 command.
Answer: A
What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D
The fault condition is related to which technology?
A. NTP
B. IP DHCP Server
C. IPv4 OSPF Routing
D. IPv4 EIGRP Routing
E. IPv4 Route Redistribution
F. IPv6 RIP Routing
G. IPv6 OSPF Routing
H. IPV4 and IPV6 Interoperability
I. IPv4 layer 3 security
Answer: G
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: G
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
KtestCCNP認定資格300-135問題集はすべての実用的な側面について詳しい情報を提 供しています。Ktestの300-135を勉強すれば、専門知識を更にはっきりと認知できます。Ktestの300-135に自信があるので、勉強者が高い点数で試験パスできると100％に確信できます。KtestのTroubleshooting and Maintaining Cisco IP Networks試験参考書が使いやすいので、受験者はKtestの問題と答え（Q@A）を理解しただけで認証を取得できます。Ktestの目的は勉強者が試験に合格することに助けを差し上げるだけでなく、勉強者が本物のIT認証の専門家になることを願っています。勉強者が仕事を求める競争力を高めて、自分の技術レベルに合わせている技術職を取って、気楽に高い給料仕事を取ることをお祈りします。
KtestのCCNP資格レベル300-135試験問題集を使って、本場の試験環境を作り出すことができ、自信を持って300-135（Troubleshooting and Maintaining Cisco IP Networks）試験を受けられ、楽に普段の理論や知識を発揮することができて、理解やすいです。勉強者はKtestが提供したCiscoの300-135認定試験問題集だけ利用して合格することが問題になりません。ほかの人を超えて業界の中で最大の昇進の機会を得ます。どうしてKtestのCiscoの300-135認定試験問題集はほかのトレーニング資料よりはるかに人気があるのでしょうか。それはいくつかの理由があります。
全てのIT職員はCiscoの300-135試験問題集をよく知っています。これは一般的に認められている最高級の認証で、勉強者のキャリアにヘルプを与えられます。勉強者はその認証を持っているのですか。Ciscoの300-135試験問題集は非常に難しい試験ですが、KtestのCiscoの300-135試験問題集を手に入れたら大丈夫です。Troubleshooting and Maintaining Cisco IP Networks試験が難しいと感じるのは良い方法を選択しないからです。Ktestを選んだら、成功の手を握ることがきるようになります。買う前に、300-135無料サンプルでダウンロードできます。Ktestは資格試験の準備に全面的な問題集を提供して、勉強者を成功に就職できるように 手伝います。
Share some CCNP 300-135 exam questions and answers below. Ticket 4 NATACL
TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload !
ip access-list standard nat_pool
permit 10.1.0.0
! interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
! interfaceSerial0/0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospd authentication message-digest
On Which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A
Ticket 5 R1ACL
TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Configuration on R1
! interface Serial0/0/0/1
description link to ISP
ip address 209.65.200.224 255.255.255.252
ip access-group edge_security in
ip nat outside
ip virtual-reassembly
ntp brasdcast client
net broadcast key 1
no cdp enable
!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255
! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any
ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any
ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any
ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any
ip access-list edge_security permit ip host 209.65.200.241 any
On which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
The fault condition is related to which technology?
A. NTP
B. IPv4 OSPF Routing
C. IPv6 OSPF Routing
D. IPV4 and IPV6 Interoperability
E. IPv4 layer 3 security
Answer: D
What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.
B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.
C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.
D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.
Answer: D
How to check MTU of interface using ping? / How can you check the links mtu size with ping command?
A. ping 10.1.1.1 size 1501
B. ping 10.1.1.1 size 1500 df-bit
C. ping 10.1.1.1
D. ping 10.1.1.1 no-size
Answer: B
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
R1 and R2 OSPF neighbor.
Which two statements are true? (Choose two)
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)
A. They are not neighbors
B. R1 (non-DR) will not update its routes to R2
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)
実際には、300-135試験過去問は、市場でトップCCNP認定の中で考えられているすべてのクラスの雇用者を探しました。この証明書のために行くごとに専門家のうち、があるため右の自分のキャリアの初めに多くの機会だけでなく、従業員の信頼と信念を受け取るので、彼らのキャリアの中で繁栄するためにバインドされています。これは、将来のための機会のアップ、さらに開口部になります。
