IT認定試験は現在の社会で、特にIT業界で最も人気のある試験だと考えられています。IT認定試験の認証資格は国際社会で広く認可されています。昇進したく、昇給したく、あるいは単に自分の仕事スキルを向上させたいなら、IT認定Applying Aruba Switching Fundamentals for Mobility試験を受験して資格を取得するのはあなたの最もよい選択です。どうですか。勉強者もきっとそう思うでしょう。ですから、躊躇しないではやく試験を申し込みましょう。HPのHPE6-A41試験問題集は最近最も人気のある試験ですから、受験したいのですか。試験に準備する方法がわからない場合、Ktestは教えてあげます。

HPE6-A41資格問題集は、HPE6-A41の仮想化ソリューションを網羅した深い知識を有することを証明するのは資格なんです。Aruba Certified Switching Associate (ACSA)資格を取得するエンジニア試験HPE6-A41に合格するプログラム参加に同意するHPHPE6-A41資格を取得することで、IT仮想化技術者は、実際に管理設計運用設計をするうえで必要とされる能力を高め、証明することができます。HPE6-A41試験参考書はすべての知識を完全に含んで、勉強者が気楽に試験のパスことを保証できます。もし、HPAruba Certified Switching Associate (ACSA)資格を認定したら、Ktestが受験者は自分の目標を達成するには助ける。受験者の認定試験に合格した需要、Ktestが受験者は高品質の問題集と本格的なテストを提供し、受験者が気楽に認定試験に合格したことを助けるんです。

Share some Aruba Certified Switching Associate (ACSA) HPE6-A41 exam questions and answers below.
A network administrator suspects that interfaces in a link aggregation have been accidentally connected to multiple switches. The administrator wants to find the hostnames of the switches on the other side of the interfaces.

How can the administrator find this information?

A. Use the show lace command to view LACP information.

B. Use the show trunks command to view link aggregation information.

C. Use the show interface command to view detailed interface status.

D. Use the show lldp info remote-device command to view LLDP information.

Answer: D

Refer to the Exhibit:

Exhibit 2 shows the IP routine tables for all the switches after the link between Switch-4 and Switch-2 failed ‘//’hen This link fails traffic between 10 1 3 0/24 and 10.1.2.0724 is disrupted

What should the network administrator do to ensure that this traffic continues to flow if this link fails in the future? (Assume that routes on Switch-1 and Switch-3 are correct.)

A. Add a route to 10.1.3.0/24 through 10.1.3 1 on Switch-4.

B. Add a route to 10.1.2.0/24 through 10.1.0.14 on Switch-2.

C. Add a route to 10.1.3.0/24 through 10.1.0.14 on Switch-2

D. Add a route to 10.1.2 0/24 through 10.1.2.1 on Switch-4.

Answer: C

A network has ArubaOS switches and an Aruba Instant cluster with IP addresses on 10.1.255.0/24

The network administrator wants to manage the devices in Aruba AirWave. The administrator uses the SNMP credentials configured on the switches to create a scan set for 10.1.255.0/24. The scan discovers the switches but not the Instant cluster.

What should the administrator do to discover the cluster in AirWave?

A. Re-configure the scan set to use the Aruba Instant default SNMPv3 user admin

B. Configure SNMP credentials in the Instant UI.

C. Specify the AirWave IP address in the Instant UI System> Admin settings.

D. Install the Instant cluster self-signed certificate on AirWave.

Answer: C

On an ArubaOS switch, what is the difference between an SNMPv2c community with manager unrestricted rights and an SNMPv2 community with operator unrestricted rights?

A. The manager unrestricted community has read-write access to all managed objects on the switch; the operator unrestricted community has read-write access to some objects but not to any Config objects.

B. The manager unrestricted community uses the Telnet/SSH password assigned to the manager to authenticate SNMP servers: the operator unrestricted community uses the Telnet/SSH password assigned to the operator.

C. The manager unrestricted community has read-write access to the switch, but the operator unrestricted community has read-only access.

D. The manager unrestricted community uses encryption, but the operator unrestricted community uses plaintext communication

Answer: A

A network administrator manages an ArubaOS switch through the CLI The administrator needs to configure an untagged VLAN assignment on a range of interfaces.

How should the administrator enter the untagged command to complete this configuration?

A. Create a manual, named interface range Then access the context for the range and specify the VLAN ID with the untagged command.

B. Access the context for a range of interfaces and specify the VLAN ID with the untagged command

C. Access the individual context for each of the interfaces and specify the VLAN ID with the untagged command

D. Access the VLAN context and specify a range of interfaces with the untagged command.

Answer: A

Refer to the Exhibit:

What is the result of this configuration?

A. The switch only adds the last static route entry to the routing table

B. All four routes are added to the routing table, but are never used.

C. The switch load shares connections across the four static next hops.

D. The switch only adds the last two static route entries to the routing table.

Answer: C

A company has a cluster of Aruba Instant APs (IAPs). The company wants to add a new IAP to the cluster.

What should network administrators ensure before they connect the new IAP?

A. that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC)

B. that the switch port for the AP is untagged for the same VLAN as the current cluster

C. that Aruba Activate is configured with provisioning rules for the IAP

D. that the DHCP server has the correct options 60 and 43

Answer: B

Refer to the Exhibit:

After the administrator enters this command, packets arrive that are destined for 10.1.8.8 and 10.1.8.13

What does the switch do with this traffic?

A. It forwards all of the traffic to 10.1.101.1.

B. It load balances some of the traffic 10.1.101.1 and some to 10.1.104.2.

C. It forwards all of the traffic to 10.1.104.2.

D. It drops the traffic.

Answer: B

Ktest HPE6-A41試験では、Aruba Certified Switching Associate (ACSA)認定を構成するために必要なスキルを検証します。HPE6-A41試験はIT環境を管理し、安全確保を行うための手段を提供することで、勉強者がITサービスを柔軟に行えるよう支援しています。Ktestは一番人気があるサイトの一つで、Aruba Certified Switching Associate (ACSA)認定の分野にとても有名です。